Zoom Sound Cards & Media Devices Driver Download For Windows 10

Posted By admin On 20/11/21
  1. Zoom Sound Cards & Media Devices Driver Download For Windows 10 32
  2. Zoom Sound Cards & Media Devices Driver Download For Windows 10 Free
Windows
  1. Strix Soar is a gaming sound card built with high-performance components to satisfy gamers who demand pure, full-sounding audio. Strix Soar features rich, immersive, and clear sound with an incredible 116dB signal-to-noise ratio (SNR), and a 600ohm headphone amplifier for deep, tight bass.
  2. Zoom Your Audio Anywhere and Everywhere The H1n's X/Y microphones capture high-quality stereo sound, supporting up to 24-bit audio at sampling rates of 44.1, 48, or 96 kHz in WAV and various MP3 formats.

The Zoom L-12 is a multichannel mixer, audio interface and recorder. And it can do all of this at the same time!

The build quality is well made despite being all plastic. The knobs, buttons, and fader feel solid enough to last. See below for a list of all the gear I used to make this video.

Getting The Best Sound In order to save bandwidth and increase intelligibility, Zoom does various tricks with sound. The main one is that it decides who is speaking at any given moment and concentrates on their sound and quietens down everyone else's. Love Zoom kit and Love Joe's technical support eve:: Reviewer: Vesta Y. From Wichita, KS: The Zoom kit works fabulous. It's hands-down better than how I started recording Zoom depos with an external mic next to speaker. Audio sounds great in Case Catalyst. Joe's technical support is fantastic. Very patient and extremely helpful.

The number one feature of the L-12 that impresses me most is its ability to both record to the SD card (multi-channel) while also being an audio interface, sending multi-channel audio to your computer at the very same time. Most mixers with built in recorders or even recorders that are also interfaces, make you choose which function you want to use, not allowing you to do both at the same time.

Currently, the only other device I have used that allows this ability is the MixPre series from Sound Devices. For the price point of this mixer, this is a huge advantage and for me it’s the biggest selling point.

On the back of the L-12 you have an on/off switch which is not a trivial addition. Other mixers I’ve reviewed do not include a switch and must be unplugged in order to power off. And when you turn off the Zoom L-12, your settings are written to the SD card so that next time you turn it back on, you begin where you left off.

Other options include a USB thumb drive for loading and off-loading settings. You also have a switch that makes the L-12 compatible with iOS devices. I didn’t get to test this out but that’s a nice feature to have. The Zoom connects to a computer via bidirectional USB2.0 which is fast enough to send 14 separate audio channels as well as bring back 4 channels of audio from the computer. The device records to SD cards both SDHC and SDXC with a built in tester to let you know if your SD card will work with the L-12. There’s also a control input that allows for the connection of devices such as a foot pedal but this is something more for musicians than podcasters. And finally you get a a Kensington Security Slot for connecting a lock so that you can walk away from your device if using it in public.

You get eight combo (XLR/Line-in) inputs which provide you with the ability to connect up to eight microphones, each with its own preamp with 60db of gain. Channels one and two have Hi-Z power while three through eight provide a pad (-20db) for line in inputs. All channels provide 48 volts of phantom power for condenser microphones. And the preamps themselves are nice. I can easily power a dynamic mic like the Sennhieser e835 (as heard in the video), using ~75% of the gain. After this point, it sounds like the preamps might introduce a little bit of noise but overall they are clean.

Zoom sound cards & media devices driver download for windows 10 32

Below the gain/trim knob, each microphone channel includes one-knob compression. This does a really nice job of preventing clipping while also helping to maintain a consistent audio level. Important to note that as you raise the compression you’ll also raise the gain because the compressor includes make-up gain. So as you increase the amount of compression, I found that about more than half way was a nice balance for preventing peaking, you’ll want to decrease your gain in order to maintain the same level and gain staging as when you are not using any compression.

When gain staging my microphone, I was satisfied with my peaks bouncing up to -20 to -18db. This produced a clean signal with plenty of headroom and I was able to raise this to loudness standards in post without introducing any unwanted noise.

With this digital mixer, your channel stops actually represent six different custom setups. In addition to the master mix, you get five custom setups which allow you to create five different “scenes” that can all be routed to their own output. For podcasters this means that you can create up to five different mix-minus setups! The setup is a little different than using aux-sends on an analog mixer but the result is the same. See the video for how to achieve a mix-minus setup on the L-12 or refer to my complete guide for setting up a mix-minus on any mixer with an aux/fx send. Each of these channels also includes the ability to setup a custom EQ.

The five separate headphone outputs also replace another piece of gear that podcasters with multiple people in studio often use, a headphone amplifier. Each of the five headphone outputs on the L-12 has it’s own gain knob so each person connected to one of the five outputs can control the level of audio going to their own headphones. The headphone preamps are also clean (without added noise) unlike the Zoom F8 that I have which has one headphone output and creates noise when turned up higher than 75%. I was happy to hear that the L-12 headphone preamps were clean and allowed me hear exactly the audio that was going into the mixer.

Each channel also includes a mute button. However, this does not work the way I’d want it to. The mute only follows through to the master mix. So when you press mute on any channel, the individual tracks being recorded to the SD card as well as the audio going out of the USB is not affected by the mute. Because of this the mute has little value, at least to me.

Channels 9/10 can be used as a USB return. The L-12 will bring audio back from your computer with it’s own fader control or this channel along with 11/12 can be used as a line-in, stereo input. As of this review, channel 11/12 can also be set to return audio via USB but in my tests this did not work on a Mac. Hopefully this and the mute buttons will be updated in future firmware updates. It would also be nice if I could see the audio levels on the LCD display for each track that is being recorded to the SD card.

The control knob in the recorder section allows you to press it in and create a marker in your audio, unfortunately it doesn’t seem to translate to your recorded files or in your recording software. The markers are stored in a project file on the SD card and you can move between each marker inside the interface of the recorder only.

As with any multichannel interface, when using with Skype, only channel one will be able to interface with Skype. In order to get around this and have Skype receive all channels from the mixer, you must setup an additional piece of software such as Audio Hijack so that you can pass the audio through an intermediate stage that will gather all channels into a single output for Skype.

If you’re looking for a multichannel audio interface, the Zoom L-12 is a device I would seriously consider. The addition of a recorder built-in really makes this device worth the price. The recorder provides you with the ability to record a backup which for me is critical in any recording setup. Other mixers that provide you with this many aux sends (most only go up to 4) cost just as much as the L-12 and don’t provide as much functionality.

Gear used to make this video*:

  • Zoom L-12 http://podhelp.me/zoomL12BH
  • Sony a6500: http://podhelp.me/a6500BodyBH
  • Sony 28mm F2 lens http://bit.ly/sonyfe28f2BH
  • Tokina 11-16mm lens http://podhelp.me/tokina11-16CanonAPSCBH
  • SD Card http://podhelp.me/trans32gbC10Ultim60…
  • Aspen Mics Stereo Lav mic kit http://amzn.to/2j66TDL
  • Sennheiser e835 microphone http://podhelp.me/SennE825BH

PICTURE PROFILE: PP7: S-Log2

EDITED AND GRADED: Adobe Premiere Pro CC using Lumetri Color Presets (tweaked to my liking).

*all links should be considered affiliate links. I encourage you to shop around for the best prices at the time you are viewing this. You can read my ethics statement via https://thepodcastersstudio.com/ethics. Thanks!

At Atomic, we’ve been staying connected with “Quarantunes” — mini live concerts given by employees and streamed to the entire company over Zoom. These concerts are a fun little pick-me-up during the week that help many of us get through the emotional roller coaster brought about by current events.

Zoom is a great platform for virtual meetings. But while its audio is great for speaking, Zoom has problems when you try to use it for music. Fortunately, I found a way to configure Zoom to provide high-quality audio even when playing musical instruments.

What’s the Problem?

I don’t work for Zoom, and I don’t know anything for certain about what is happening within the application. What follows is my theory.

Zoom sound cards & media devices driver download for windows 10 32

Because Zoom was designed to provide high-quality audio for normal speaking voices, the application performs audio processing that attempts to eliminate feedback during calls. Feedback is when audio from your speakers gets picked up by your microphone, amplified, and then played back out of your speakers again. This feedback loop happens again and again, creating a loud, high-pitched ringing sound that makes it feel like your head might explode — which is why Zoom tries to cut it out.

When you attempt to play an instrument like a violin, mandolin, or guitar through Zoom, the application thinks the high-frequency sounds from your instrument are feedback and eliminates them too. The result is that your audience hears music that cuts in and out. This is not great for a live concert.

How Do We Fix It?

In addition to screen sharing, Zoom also supports sharing your computer audio. You can share music from applications on your computer with participants on the call, and the audio is really good. This tells me that Zoom doesn’t perform the same audio processing (feedback elimination) on audio shared this way. That got me thinking: Is there a way to share my microphone audio in the same way? It turns out there is.

In order to share your microphone audio as described above, you have to create a situation where your microphone audio is being played through your speakers. In the music world, this is referred to as “monitoring” your microphone input.

The instructions below are for a Mac. Depending on the type of computer you’re using, you may have to find a different way of accomplishing it.

1. Connect Microphone

An external microphone is optional. The built-in mic on my MacBook Pro actually picks up instrument audio quite well. But if you want to use an external mic, connect it now.

2. Connect Headphones

But don’t put them in/on your ears. For this to work, you’ll have to configure your setup such that the microphone audio is playing back through your speakers. Without headphones, that would certainly create a terrible feedback situation. If you put the headphones on, the delay in the output will make it really difficult to play your instrument.

Zoom Sound Cards & Media Devices Driver Download For Windows 10

3. Join the Zoom Meeting & Mute Your Mic

Since you’ll be sharing your microphone audio and bypassing the normal microphone audio channel, you’ll need to mute yourself in Zoom.

4. Set Computer Volume to Mid-level

Make sure your computer system volume is set somewhere around mid-level or above. If you have it muted or turned all the way down, this setup will not work.

5. Open Quicktime Player & Select a New Audio Recording

We’ll use Quicktime Player to monitor (or passthrough) the mic audio to the speakers. Open Quicktime Player and, in the application menu, select File -> New Audio Recording. You should see the Audio Recording window open up. You don’t need to record yourself for this to work, but you can if you want to.

6. Select Microphone Input

Windows

On the Audio Recording window, click the small arrow next to the record button. Choose whichever microphone you wish to use. The internal mic is fine. If you plugged in a headset, you probably shouldn’t select that microphone, although it might work.

Zoom Sound Cards & Media Devices Driver Download For Windows 10 32

7. Set Quicktime Output Volume

On the Audio Recording window, move the volume slider all the way to maximum. If you didn’t connect your headphones, prepare for a wonderful ear-splitting effect! You are now monitoring your microphone audio. If you look at the level indicator on the Audio Recording window, you should see it dance as you talk or play. You can also listen to your headphones for a moment to ensure that it’s working. If it’s not working, try restarting Quicktime Player.

8. Share Computer Sound

Finally, in Zoom, click the “Share Screen” icon at the bottom of the call window. This will display the sharing options dialog. At the top of the dialog, click “Advanced” to see more options. Then select “Music or Computer Sound Only” and click “Share.”

9. Verify Setup

Though you won’t be able to hear them, your friends will be able to hear you. Ask them to give you a thumbs-up if they can hear you. Now you should be good to go. Rock on!

Zoom Sound Cards & Media Devices Driver Download For Windows 10 Free

10. Cleaning Up

After you’ve finished putting on your show, quit Quicktime Player. That will immediately remove the microphone pass-through situation. Then go back into Zoom and unmute your mic. You should be back to normal.

Now go and put on amazing concerts for your friends and family! If you find other setups that work for you, please share.