- Winbond Hard Disk Controller Driver Download For Windows 10
- Winbond Hard Disk Controller Driver Download For Windows 10 64-bit
- Winbond Hard Disk Controller Driver Download For Windows 10 Installer
Download Standard IDE/ESDI Hard Disk Controller for Windows to hdc driver. Download SD card reader driver for Windows 10 in Device Manager Press Windows + R, type devmgmt.msc, press Enter to open Device Manager in Windows 10. In Device Manager window, you can expand Universal Serial Bus controllers category. Next right-click on the SD card reader driver and select Uninstall device. This is not the case as the BIOS doesn't recognize disk in AHCI but Windows is already configured with msahci driver. As BIOS can't boot it directly because it doesn't see SATA disk so I would like to have a helper bootloader which boots from USB and then chain loads windows from SATA drive. If you’re really technical and look at the device stack for a disk on occasion within a debugger, you would notice that access to a virtual disk that is part of a storage pool also utilizes the SpacePort.sys device driver. This is a necessary driver to provide the Storage Spaces functionality within Windows.
It is reported that on Windows 10, there always exists a SATA AHCI controller driver compatibility problem. After updating to Windows 10, your Windows 7 SATA AHCI controller driver can no longer be compatible with Windows 10. And this driver problem shows itself from sleeping to shutting down or restarting.
For the purpose of solving this Standard SATA AHCI Controller Windows 10 driver missing by way of updating its driver, have you mastered the concept of Standard SATA AHCI controller?
What is Standard SATA AHCI Controller?
As the abbreviation of Advanced Host Controller Interface, AHCI is a hardware mechanism defined by Intel to specify the SerialATA (SATA) host bus adapter and is designed to provide a standardized way to detect, configure and programme SATA/AHCI adapters.
You need to figure out several confusing concepts related to AHCI.
What Are the Differences Between AHCI and IDE?
It is a long time confusion that people always mistake AHCI for IDE (short for Integrated Drive Electronics), which is the storage interface. Both of AHCI and IDE are the modes in which a hard drive communicates with Windows 10, 7, 8 by SATA controller driver.
However, compared with IDE, AHCI runs faster and possesses with more advantages, such as hot-plugging and native command queuing. To put it in simple words, IDE is the best for the older operating system, whereas AHCI is designed for Windows 10.
But a well-known demerit of AHCI is its incompatibility. So this is why here you are supposed to download or update Standard SATA AHCI Controller driver for Windows 10.
What Are the Differences Between SATA and AHCI?
SATA refers to Serial ATA interface which can operate on AHCI and IDE and performs at high data speed. For one thing, AHCI adds more functionalities such as hot plugging and NCQ to SATA also used for storage media. For another thing, AHCI is new programming standard defining a new mode for SATA. But besides AHCI mode, there are other modes for SATA, such as IDE and RAID mode.
Winbond Hard Disk Controller Driver Download For Windows 10
What Does the IDE, AHCI and RAID Mode Mean for SATA?
These three modes denote different meanings for SATA in BIOS settings.
IDE mode: applied in previous windows system without hot plugging and NCQ capabilities. Usually for Parallel ATA (PATA) era hard disks.
AHCI mode: for Windows 10 with new features providing for SATA.
RAID mode: a storage technology shifting multiple tasks to a single unit can be divided into RAID 0 to 6 according to different disk drives.
Update Standard AHCI Controller Driver on Windows 10
Now that you have learned about what AHCI is, to fix the Standard SATA AHCI Controller driver issue or to simply update its AHCI controller driver, you are capable of using several different ways to download the latest AHCI controller drivers for Windows 10.
Download Standard AHCI Controller Driver via Device Manager
1. Go to Device Manager.
2. Aim at and expand IDE ATA/ATAPI Controller and right click the Standard SATA AHCI Controller to Update driver.
3. Choose Search automatically for updated driver software.
4. Windows 10 searches for the updated driver on your PC and online.
After that, you will have downloaded and installed the best and latest Standard SATA AHCI controller driver for Windows 10. And this AHCI driver incompatibility issue can also disappear from your computer.
Winbond Hard Disk Controller Driver Download For Windows 10 64-bit
Download Standard SATA AHCI Controller Driver Automatically
Driver Booster can be a perfect tool for you if you feel like to download or update Standard SATA AHCI Controller driver for Windows 10. It is safe enough to get the latest AHCI drivers to solve the Standard SATA AHCI Controller driver problems.
Download Driver Booster and installed it on your PC, you can run it to help you update the Windows 10 AHCI controller drivers.
Winbond Hard Disk Controller Driver Download For Windows 10 Installer
1. Hit Scan. Therefore Driver Booster is authorized to search for your PC of the outdated or corrupted driver.
2. Select IDE ATA/ATAPI controllers, and click Update button.
Or you can select all outdated driver and click Update Now to get all the outdated drivers to be downloaded or updated on Windows 10.
At this point, you will have gained the ways to download or update Standard SATA AHCI Controller driver for Windows 10 and also something like the differences between IDE and AHCI, including their merits and demerits on Windows 10.