Drivers Maxim Integrated Products Input Devices

Posted By admin On 20/11/21
MAX13085EESA+

MPM3632C: 18V Input, 3A Module, Synchronous, Forced CCM, Step-Down Converter with Integrated Inductor MAX14906: Industry’s first Quad-Channel Digital I/O TMC2226: Ultra-Silent Stepper Motor Driver with Step/Direction. Technologies; Analog; Analog Devices to Buy Maxim Integrated in More Than $20 Billion Deal. Analog Devices said that once the deal closes it will sell in the range of 50,000 products and serve.

IC TXRX RS485/422 8-SOIC
Maxim Integrated Products
Transceiverr
1.MAX13082ECSA.pdf (24 pages)
1/1
RS422, RS485
4.5 V ~ 5.5 V
Surface Mount
Drivers Maxim Integrated Products Input devices
8-SOIC (3.9mm Width)
Lead free / RoHS Compliant
  • Current page: 1 of 24
ed, RS-485/RS-422 transceivers feature one driver and
one receiver. These devices include fail-safe circuitry,
guaranteeing a logic-high receiver output when receiver
inputs are open or shorted. The receiver outputs a logic-
high if all transmitters on a terminated bus are disabled
a hot-swap capability to eliminate false transitions on the
The MAX13080E/MAX13081E/MAX13082E feature
reduce reflections caused by improperly terminated
cables, allowing error-free data transmission up to
also feature slew-rate-limited drivers but allow transmit
MAX13088E driver slew rates are not limited, making
MAX13089E slew rate is pin selectable for 250kbps,
The MAX13082E/MAX13085E/MAX13088E are intended
for half-duplex communications, and the MAX13080E/
MAX13087E are intended for full-duplex communica-
tions. The MAX13089E is selectable for half-duplex or
full-duplex operation. It also features independently
programmable receiver and transmitter output phase
The MAX13080E–MAX13089E transceivers draw 1.2mA
of supply current when unloaded or when fully loaded
with the drivers disabled. All devices have a 1/8-unit
transceivers on the bus.
are available in 14-pin PDIP and 14-pin SO packages.
Drivers Maxim Integrated Products Input devices
MAX13087E/MAX13088E are available in 8-pin PDIP and
8-pin SO packages. The devices operate over the com-
mercial, extended, and automotive temperature ranges.
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
Utility Meters
Industrial Control
Security Systems
Profibus
________________________________________________________________ Maxim Integrated Products
+5.0V, ±15kV ESD-Protected, Fail-Safe,
Applications
Products
♦ Extended ESD Protection for RS-485/RS-422 I/O Pins
♦ Hot-Swap Input Structures on DE and RE
♦ Low-Current Shutdown Mode (Except
♦ Phase Controls to Correct for Twisted-Pair
♦ Available in Industry-Standard 8-Pin SO Package
Ordering Information continued at end of data sheet.
Selector Guide, Pin Configurations, and Typical Operating
MAX13080ECPD
MAX13080EEPD
MAX13080EAPD
EIA/TIA-485 Compatibility
(MAX13080E–MAX13085E/MAX13089E)
(MAX13089E)
±15kV Human Body Model
-40°C to +85°C
-40°C to +125°C
TEMP RANGE
0°C to +70°C
PIN-
14 PDIP
14 PDIP
14 PDIP
Features
CODE
S14-2
S14-2
S14-2

MAX13085EESA+ Summary of contents

Page 1

... Industrial Control Telecom Security Systems Instrumentation Profibus ________________________________________________________________ Maxim Integrated Products For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com. ♦ +5.0V Operation ♦ Extended ESD Protection for RS-485/RS-422 I/O Pins ±15kV Human Body Model ♦ ...

Page 2

ESD-Protected, Fail-Safe, Hot-Swap, RS-485/RS-422 Transceivers ABSOLUTE MAXIMUM RATINGS (All Voltages Referenced to GND) Supply Voltage (V ).............................................................+6V CC Control Input Voltage (RE, DE, SLR, H/F, TXP, RXP)......................................................-0.3V to +6V Driver Input Voltage (DI)...........................................-0.3V to +6V Driver Output Voltage ...

Page 3

ESD-Protected, Fail-Safe, Hot-Swap, RS-485/RS-422 Transceivers DC ELECTRICAL CHARACTERISTICS (continued +5.0V ±10 MIN MAX PARAMETER SYMBOL Driver Short-Circuit Output Current Driver Short-Circuit Foldback Output Current Thermal-Shutdown Threshold Thermal-Shutdown Hysteresis Input ...

Page 4

ESD-Protected, Fail-Safe, Hot-Swap, RS-485/RS-422 Transceivers DRIVER SWITCHING CHARACTERISTICS MAX13080E/MAX13081E/MAX13082E/MAX13089E WITH SRL = UNCONNECTED (250kbps +5.0V ±10 MIN MAX PARAMETER SYMBOL Driver Propagation Delay Driver Differential Output Rise or Fall ...

Page 5

ESD-Protected, Fail-Safe, Hot-Swap, RS-485/RS-422 Transceivers DRIVER SWITCHING CHARACTERISTICS MAX13083E/MAX13084E/MAX13085E/MAX13089E WITH SRL = +5.0V ±10 MIN MAX PARAMETER SYMBOL Driver Propagation Delay Driver Differential Output Rise or Fall Time ...

Page 6

ESD-Protected, Fail-Safe, Hot-Swap, RS-485/RS-422 Transceivers DRIVER SWITCHING CHARACTERISTICS MAX13086E/MAX13087E/MAX13088E/MAX13089E WITH SRL = GND (16Mbps +5.0V ±10 MIN MAX PARAMETER SYMBOL Driver Propagation Delay Driver Differential Output Rise or Fall ...

Devices
Page 7

ESD-Protected, Fail-Safe, Hot-Swap, RS-485/RS-422 Transceivers (V = +5.0V +25°C, unless otherwise noted SUPPLY CURRENT vs. TEMPERATURE 1.60 NO LOAD 1.50 1.40 1. 1.00 0.90 0.80 ...

Page 8

ESD-Protected, Fail-Safe, Hot-Swap, RS-485/RS-422 Transceivers (V = +5.0V +25°C, unless otherwise noted SHUTDOWN CURRENT vs. TEMPERATURE -40 -25 - ...

Page 9

ESD-Protected, Fail-Safe, Hot-Swap, RS-485/RS-422 Transceivers (V = +5.0V +25°C, unless otherwise noted DRIVER PROPAGATION DELAY (500kbps) MAX13080E-89E toc18 R = 100Ω 2V/div V Y 5V/div 400ns/div ...

Page 10

ESD-Protected, Fail-Safe, Hot-Swap, RS-485/RS-422 Transceivers GENERATOR DZH DZH(SHDN) OUT Figure 4. Driver Enable and Disable Times (t GENERATOR DZL DZL(SHDN OUT V OL Figure 5. Driver Enable and ...

Page 11

ESD-Protected, Fail-Safe, Hot-Swap, RS-485/RS-422 Transceivers V ATE ID Figure 6. Receiver Propagation Delay Test Circuit +1.5V -1.5V S1 OPEN S2 CLOSED S3 = +1. OPEN S2 CLOSED S3 = +1. ...

Page 12

ESD-Protected, Fail-Safe, Hot-Swap, RS-485/RS-422 Transceivers PIN MAX13080E MAX13081E MAX13082E MAX13083E MAX13084E MAX13085E MAX13086E MAX13087E MAX13088E HALF- FULL-DUPLEX DUPLEX DEVICES DEVICES — — — — — — — ...

Page 13

ESD-Protected, Fail-Safe, Hot-Swap, RS-485/RS-422 Transceivers PIN MAX13080E MAX13081E MAX13082E MAX13083E MAX13084E MAX13085E MAX13086E MAX13087E MAX13088E HALF- FULL-DUPLEX DUPLEX DEVICES DEVICES 12 8 — — — — — — 6 — — — *MAX13089E only. In ...

Page 14

ESD-Protected, Fail-Safe, Hot-Swap, RS-485/RS-422 Transceivers MAX13082E/MAX13085E/MAX13088E TRANSMITTING INPUTS MAX13089E RE TXP ...

Page 15

ESD-Protected, Fail-Safe, Hot-Swap, RS-485/RS-422 Transceivers Detailed Description The MAX13080E–MAX13089E high-speed transceivers for RS-485/RS-422 communication contain one driver and one receiver. These devices feature fail-safe circuit- ry, which guarantees a logic-high receiver output when the receiver inputs are open ...

Drivers maxim integrated products input devices list
Page 16

ESD-Protected, Fail-Safe, Hot-Swap, RS-485/RS-422 Transceivers V CC 10µs TIMER TIMER 5kΩ DE 100µA 500µ Figure 9. Simplified Structure of the Driver Enable Pin (DE) MAX13089E Programming The MAX13089E has several programmable operating modes. Transmitter rise and ...

Page 17

ESD-Protected, Fail-Safe, Hot-Swap, RS-485/RS-422 Transceivers 1MΩ 1500Ω DISCHARGE CHARGE-CURRENT- RESISTANCE LIMIT RESISTOR HIGH STORAGE VOLTAGE 100pF CAPACITOR DC SOURCE Figure 10a. Human Body ESD Test Model I 100 90% ...

Page 18

ESD-Protected, Fail-Safe, Hot-Swap, RS-485/RS-422 Transceivers Low-Power Shutdown Mode (Except MAX13081E/MAX13084E/MAX13087E) Low-power shutdown mode is initiated by bringing both RE high and DE low. In shutdown, the devices typically draw only 2.8µA of supply current. RE and DE can ...

Page 19

ESD-Protected, Fail-Safe, Hot-Swap, RS-485/RS-422 Transceivers A 120Ω 120Ω NOTE: RE AND DE ON MAX13080E/MAX13083E/MAX13086E/MAX13089E ONLY. Figure 13. Typical Full-Duplex RS-485 Network HALF/FULL DATA RATE PART DUPLEX (Mbps) MAX13080E Full ...

Page 20

ESD-Protected, Fail-Safe, Hot-Swap, RS-485/RS-422 Transceivers N. N. GND N.C. GND 7 8 DIP/SO V ...

Page 21

ESD-Protected, Fail-Safe, Hot-Swap, RS-485/RS-422 Transceivers Pin Configurations and Typical Operating Circuits (continued) RO TOP VIEW H RXP RXP MAX13089E H ...

Page 22

ESD-Protected, Fail-Safe, Hot-Swap, RS-485/RS-422 Transceivers PART TEMP RANGE MAX13081ECPA 0°C to +70°C MAX13081ECSA 0°C to +70°C MAX13081EEPA -40°C to +85°C MAX13081EESA -40°C to +85°C MAX13081EAPA -40°C to +125°C MAX13081EASA -40°C to +125°C MAX13082ECPA 0°C to +70°C MAX13082ECSA 0°C ...

Page 23

ESD-Protected, Fail-Safe, Hot-Swap, RS-485/RS-422 Transceivers (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information www.maxim-ic.com/packages.) ______________________________________________________________________________________ Package Information (continued) 23 ...

Page 24

... Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 ____________________ 24 © 2005 Maxim Integrated Products ...

Related keywords

Drivers Maxim Integrated Products Input Devices List

  • max13080eesd
  • max13082easa
  • max13082eesa
  • max13085ecsa
  • max13020
  • max13085eepa
  • max13085eesa+t
  • MAX13085EESA+ datasheet
  • MAX13085EESA+ data sheet
  • MAX13085EESA+ pdf datasheet
  • MAX13085EESA+ component
  • MAX13085EESA+ part
  • MAX13085EESA+ distributor
  • MAX13085EESA+ RoHS
  • MAX13085EESA+ datasheet download