Download Tiepie Engineering Driver

Posted By admin On 21/11/21

With the TiePie engineering Automotive Diagnostics Kit ADK5004D, the automotive specialist obtains all necessary tools, an Automotive Test Scope ATS5004D and special automotive accessories, to perform most of the diagnostic tests to locate the problem, all conveniently packed in a protective case.

  1. Nov 08, 2018 MatlabLibTiePie: TiePie engineering's instrument library for Matlab 7.6 = 2008a and higher. MatlabLibTiePie is a Matlab package for using LibTiePie supported devices with Matlab 7.6 = 2008a and up. LibTiePie is a library for controlling TiePie engineering's test and measurement equipment. The following USB oscilloscopes are supported.
  2. Now with TiePie entry model can see that costs about the same, but cannot support analog bandwidth at all due to insufficient sample rates. In effect 20MHz 8bit and 2MHz 14bit. Now look at TiePie top model: HS6-DIFF-1000XM-W5 with probes: €2295.6 (assumed 20% VAT) 250MHz, 1GSa/s in 8bit mode, 100MSa/s in 14bit mode (1ch).
  3. To use this site to find and download updates, you need to change your security settings to allow ActiveX controls and active scripting. To get updates but allow your security settings to continue blocking potentially harmful ActiveX controls and scripting from other sites, make this site a trusted website.

Related searches

  • » öcotec autogas engineering 3.0
  • » öcotec autogas engineering download
  • » autogas italy turkce program indir
  • » programma romano autogas ris n
  • » официальный сайт romano autogas
  • » autogas italia pj
  • » aldesa autogas
  • » autogas aitalia
  • » pj autogas italia
  • » öcotec autogas software download
Download Tiepie Engineering Driver

öecotec autogas engineering

at UpdateStar
  • More

    ÖCOTEC Autogas Engineering

  • More

    Windows Driver Package - Startek Engineering Inc. (WinUSB) Biometric (02/13/2015 7.10.2016.

  • More

    PJ - Autogas Italia

  • More

    Offboard Diagnostic Information System Engineering

  • More

    PCMSCAN 2.4.12

    Palmer Performance Engineering - 17.8MB - Shareware -
  • More

    McGraw-Hill Dictionary of Engineering

    McGraw-Hill Dictionary of Engineering (remove only) - Shareware -
  • More

    Engineering Client Viewer

  • More

    TiePie engineering TiePieSCOPE HS805 driver

  • More

    Aspen Basic Engineering 64bit

  • More

    Banner Engineering XS26-2 Expandable Safety Controller

Descriptions containing

öecotec autogas engineering

  • More

    AutoCAD 2019

    Autocad Converter is a batch DWG and DXF bi-directional converter that allows you to convert DWG to DXF, DXF to DWG without the need of AutoCAD. more info...
  • More

    Bandisoft MPEG-1 Decoder

    Bandisoft MPEG-1 decoder is a freeware. You can freely install and redistribute it unless you reverse engineer, decompile or disassemble the Software. more info...
  • More

    Wondershare Recoverit

    Recoverit for Mac is the best data recovery software for Mac with a high recovery rate. 1.Meet the New Video Repair Function.Repairs video files on Mac like MP4, MOV, M4V, and M4A files.Repairs video files on Windows like … more info...
  • More

    PE Explorer R2 1.99.6

    PE Explorer provides powerful tools for disassembly and inspection of unknown binaries, modifying the properties of executable files and customizing and translating their resources. more info...
  • More


    LEGO MINDSTORMS EV3 is the result of three years of product development by an international team of LEGO designers. LEGO Mindstorms EV3 is a powerful and engaging tool for teaching engineering, technology, science, and math. more info...
  • More


    FileProtector is the #1 crypter and binder on the market. This crypter is easily usable by anyone without any crypting knowledge. The crypter works on all Windows systems (XP, Vista, Win7 & Win8, 32/64bit). more info...
  • More

    English 40.3.100

    English is a base foundation of software development and is the global language of business. If your English is poor then you are out of the game no matter how good your programming skills are. more info...
  • More

    AutoCAD Mechanical

    AutoCAD Mechanical is a product engineering design software that incorporates the functionality of AutoCAD with libraries of standards-based parts and tools to drive mechanical CAD. more info...
  • More

    X-Plane 11.0

    X-Plane is a flight simulator that reads in thegeometric shape of any aircraft and then figuresout how that aircraft will fly. more info...
  • More

    VariCAD 2015-1.09

    VariCAD is a 3D/2D CAD system for mechanicalengineering. In addition to standard tools for 3Dmodeling and 2D drafting, the CAD system providestools for sheet metal unbending and crash tests,libraries of standard mechanical parts … more info...
Additional titles containing

öecotec autogas engineering

  • More

    Windows Driver Package - Startek Engineering Inc. (WinUSB) Biometric (02/13/2015 7.10.2016.

  • More

    Offboard Diagnostic Information System Engineering

  • More

    PJ - Autogas Italia

  • More

    Engineering Client Viewer

  • More

    Aspen Basic Engineering 64bit

Most recent searches

  • » movie plus en pc
  • » ship management nl mail
  • » helix studios官网迅雷
  • » xnview 라이센스
  • » machine expert basic
  • » scarlett johnsson nude photos
  • » pinanacle software kostenlos downladen
  • » cosa è tastiera calliope
  • » 收藏永久
  • » e plus投资平台
  • » net framework ultima versione
  • » antiviurs etrust
  • » aktakom oscilloscope pro скачать
  • » kaba elo programmer
  • » sconnect host gemalto
  • » bruker data analysis login
  • » descarga de manage morola
  • » 软件 vertex g4
  • » gstat 2.0 exe
  • » iccup launcher dota 1

High performance lab scope for the automotive technician


Key specifications

  • 12, 14, 16 bit resolution
  • 50 MSa/s sampling
  • 50 MHz bandwidth
  • 128 Kpts memory per channel
  • 100 ppm time base accuracy

Download Tiepie Engineering Driver Download


Order code: ATS5004D
EAN: 7423654119158
Price: € 1,610.00

The Automotive Test Scope ATS5004D is a four channel automotive oscilloscope with differential inputs. Besides the normal features of a professional USB oscilloscope, the Automotive Test Scope ATS5004D has some specific features like SureConnect connection test and resistance measurement that make it an ideal instrument for automotive measurements.

Differential inputs

With the differential inputs it is possible to measure four totally unrelated signals simultaneously. It is no longer possible to create a short circuit through the oscilloscope or through a second device connected to your computer and to the car, like e.g. a fault code scanner. So no risk of damaging the car, the oscilloscope or the computer.

Connection test

The SureConnect connection test feature of the Automotive Test Scope ATS5004D tells you immediately whether your test probe or clip actually makes electrical contact or not. No more doubt whether your probe doesn't make contact or there really is no signal.

This is useful when surfaces are oxidized and your probe cannot get a good electrical contact. Simply activate the SureConnect and you know whether there is contact or not. Also when back probing connectors in confined places, SureConnect immediately shows whether the probes make contact or not.

Resistance measurement

Many automotive sensors are based on variable resistors. Use your Automotive Test Scope ATS5004D in the resistance setting to test them, no more need to take a separate ohm meter. Resistance values can be displayed as a number, but it is also possible to display the resistance variation in time, in a graph.

Fully supported by ATIS

All features of the Automotive Test Scope ATS5004D are fully supported by ATIS, the Automotive Test and Information System. Select a specific diagnostic measurement in ATIS, click the measure button and the Automotive Test Scope ATS5004D will be completely setup for that specific measurement and ready to perform it.

Automotive Test Scope ATS5004D specifications

The tables below show detailed specifications of the Automotive Test Scope ATS5004D. Jump to acquisition specifications or general specifications.

Download Tiepie Engineering Drivers

Acquisition system

Number of input channels4 analog
Ch1, Ch2, Ch3, Ch4BNC
Resolution12, 14, 16 bit user selectable
Accuracy0.3 % of full scale ± 1 LSB
Ranges (Full scale)±200 mV
±400 mV
±800 mV
±2 V
±4 V
±8 V
±20 V
±40 V
±80 V
Impedance2 MΩ / 40 pF
Maximum input voltage (in all ranges)±200 V (DC + AC peak < 10 kHz)
with 1:10 attenuator ±300 V (DC + AC peak < 10 kHz)
Maximum Common Mode voltage200 mV to 800 mV ranges : 2 V
2 V to 8 V ranges : 20 V
20 V to 80 V ranges : 200 V
Common Mode Rejection Ratio-48 dB
Bandwidth (-3dB)DC to 50 MHz maximum
AC coupling cut off frequency (-3dB)1 Hz
Channel Isolation500 V
Channel Separation-80 dB
Maximum voltage on connection200 V (DC + AC peak < 10 kHz)
Resistance measurement
Ranges (Full scale)100 Ω
200 Ω
500 Ω
1 kΩ
2 kΩ
5 kΩ
10 kΩ
20 kΩ
50 kΩ
100 kΩ
200 kΩ
500 kΩ
1 MΩ
2 MΩ
Response time (to 95%)< 5 ms
Maximum sampling rateOn all channels simultaneously
12 bit50 MSa/s
14 bit3.125 MSa/s
16 bit195.3 kSa/s
Maximum streaming rateOn all channels simultaneously
12 bit500 kSa/s
14 bit480.8 kSa/s
16 bit195.3 kSa/s
Sampling clock source
Accuracy±0.01 %
Stability±100 ppm over -40 °C to +85 °C
Time base aging±5 ppm/year
ExternalOn extension connector
Memory128 Kpts per channel
SystemDigital, 2 levels
SourceCH1, CH2, CH3, CH4, AND, OR, digital external
Trigger modesRising edge, falling edge, inside window, outside window
Level adjustment0 to 100 % of full scale
Hysteresis adjustment0 to 100 % of full scale
Resolution0.025 % (12 bits)
Pre trigger0 to 128 KiSamples, 1 sample resolution)
Post trigger0 to 128 KiSamples, 1 sample resolution)
Digital external trigger
InputExtension connector
Range0 to 3.3 V (5 V max)


InterfaceUSB 2.0 High Speed (480 Mbit/s); (USB 1.1 Full Speed (12 Mbit/s) and USB 3.0 compatible)

Power Requirements

Power from USB port500 mA max (2.5 W max)
Power via external power input / extension connector1500 mA max (7.5 W max)
Minimum voltage4.5 VDC
Maximum voltage14 VDC


Instrument height25 mm (1 inch)
Instrument length170 mm (6.7 inch)
Instrument width140 mm (5.2 inch)
Cord length1.8 m (70 inch)
Weight460 g (16 ounce)

I/O connectors

Channel 1...4Isolated BNC
USBfixed cable with USB 2.0 and USB 1.1 type A connector
Extension connectorD-sub 25 pins female

System Requirements

PC I/O connectionUSB 2.0 High Speed (480 Mbit/s); (USB 1.1 Full Speed (12 Mbit/s) and USB 3.0 compatible)
Operating SystemWindows 7 / 8 / 10

Operating Environment

Ambient temperature0 to 55 °C
Relative humidity10 to 90% non condensing

Storage Environment

Ambient temperature-20 to 70 °C
Relative humidity5 to 95% non condensing

Certifications and Compliances

CE mark complianceYes


Convenient carry caseCarry case BB451
InstrumentAutomotive Test Scope ATS5004D
Probes4 x Measure lead TP-C1812B, BNC -> 4 mm banana plug
Accessoires4 x Differential attenuator TP-DA10
external power cable for second USB port
SoftwareWindows 7, 8, 10, via website
DriversWindows 7, 8, 10, via website
Manualinstrument manual and software user's manuals
color printed on paper and digital, via website
Total package weightApprox. 3 kg

The Automotive Test Scope ATS5004D is delivered with:

Cary caseCarry case BT341
InstrumentAutomotive Test Scope ATS5004D
Measure leads4 x Measure lead TP-C1812B, Differential BNC -> 4 mm banana plug
Differential attenuator4 x Differential attenuator TP-DA10
Softwarefor Windows 7/8/10, via website
Driversfor Windows 7/8/10, via website
Manualsinstrument manual and software user's manuals
color printed and digital, via website

Several downloads for the Automotive Test Scope ATS5004D are listed below, including Multi Channel oscilloscope software, drivers and manuals.

Driver & Software

Download Tiepie Engineering Driver Windows 7

USB driver8.1.9Windows 10, 32 and 64 bit3.80 MB download
Multi Channel software1.43.4Windows 10, 32 and 64 bit, including PDF manual91.76 MB download

Manuals & Documents

Download Tiepie Engineering Driver Licence

Multi Channel software manual 1.07English4.86 MB download
Automotive Test Scope ATS5004D Instrument manual2.27English1.03 MB download
Automotive Test Scope ATS5004D DatasheetEnglish2.41 MB download

Performing a SureConnect connection test

The connection test function of the Multi Channel oscilloscope software is briefly explained,with explanation how to do a connection test.
Read whole article...

Performing a resistance measurement

The resistance measurement in the Multi Channel oscilloscope software is briefly explained.
Read whole article...

Performing a power measurement

Engine power measurement (kW and hp) with accelerometer and lab scope, performed while driving a vehicle,without dyno or other test facilities.
Read whole article...

Performing a relative compression test

The relative compression test in Multi Channel oscilloscope software is briefly explained, with instructions on how to perform arelative compression test with just a lab scope and current clamp.
Read whole article...

Safe measuring using differential inputs

An automotive oscilloscope with differential inputs avoids damaging car electronics as result of a wrongconnection during measuring.
Read whole article...